How to analyze the effect of wire bonder

The welded steel mesh consumed by the wire bonder is different from the ordinary welded wire mesh. If it is used for building wall, its size is different from that for high-precision end mechanical equipment, and the request is relatively not particularly fine. During the welding process, the thermal expansion and cold contraction of the wire mesh will form a certain deviation, and the reasonable deviation will certainly exist.

It is normal that the dimension diagonal error ± 5mm. However, the diameter of the outlet wire should be controlled within ± 3mm. Then the welding of electric welding mesh: the solder joint should be solid, and there should be no false welding or missing welding. For example, the total height of two wire overlay is 10 mm for two wire mesh with 5mm diameter

After welding, the overlapping height of the double solder joint should be between 7-9mm, and the welding effect is better. If the welding joint is too deep, the supporting force will be weakened, and it is easy to break. If the welding joint is too shallow, the solder joint is not solid and can not play the role of crack resistance. So it is very important to distinguish the performance of wire bonder. Welding machine for welding steel fence.

At the same time, there are two pieces of pneumatic cutting machine automatic cutting, so the output is higher than the single-chip microcomputer. The mesh size in the two directions of the reinforcement brand, diameter is the same, load reinforcement (transverse reinforcement) spacing is 50 mm, 60 mm, connection reinforcement (longitudinal reinforcement) is not less than 4, the spacing is not more than 400.